1, glue machine Y type filter cleaning: its location in the auxiliary pump outlet, wash the end cover will be screwed, soaked with kerosene, brush with a brush clean。 The installation will be placed on the end cover by hand net screwed in the end wrench, tighten。 Use a set of glue to wash once, such as no impurities, two groups of rubber wash once, flexible grasp。
2, glue machine cleaning and maintenance: usually called glass glue machine cleaning work is aimed at glue after the operation in the glue machine equipment in all parts of the cleaning and cleaning。 It is not the daily glue cleaning, but the cleaning of the filter, mixer, needle valve and glue gun after the completion of the production task。
3, cleaning glue machine needle cleaning: unscrew the nut with a small clamp screw, pull out the needle body, spring. Clean all. Needle valve outlet plane and needle cap ensure no impurities, scratches, deformation. When installing, insert the needle into the valve body, the spring is sheathed on the needle body, the nut is screwed to the inside, and the power is about 1 to 2 kilograms.
4 glue machine glue gun cleaning: muzzle mixer cleaning, directly unscrew the muzzle mixer, take out the mixing core. When the first mixer cleaning grips, positioning screws loose on the gun, then unscrew the grips mixer. The muzzle mixer is cleaned with the same period of the mixer; the grab mixer is cleaned with the same period of the gun, and washed once or half a year.
In this paper, a two component glue machine to provide you, our website is: http://www.tbplay265.com, we will wholeheartedly provide you with better service, you are welcome to visit!