1, the vent valve on the press plate should be kept smooth, and should be regularly dredged and cleaned。
Don't cut off the gas source, 2 normal work, if it is found that asgassource should stop working.
3。 If the pause time is more than 15 minutes in the process of gumming, the "gun" must be used。 This machine has an alarm function, and there will be a buzzer with no punching glue at the time。
4, regular inspection of gas source, first of all, we should ensure the use of dry clean compressed air, and regularly discharge the water in the separation filter, check whether the oil in the oil mist is enough.
5, silicone rubber B components will be crusted in air, which will affect the normal operation of pumps and the smooth flow of pipes。 Therefore, all channels of B components should be shut down after depressurization, so that B components must not touch air。
6, if there is air in the B barrel, the air will not be discharged. The B pump will move back and forth quickly, and it can not supply glue to the high-pressure pump, which will affect the whole system. Therefore, the air must be drained out. The method is to put the pressure plate into the new pressure and deflate.
7, hydraulic station system pressure, can not be adjusted too high, according to the indoor environment temperature and other actual conditions, to meet the glue mouth normal glue can be evenly glued。 When the hydraulic station is opened, the glue gun must be opened, otherwise the pressure of the B components will rise very high, causing a safety accident。
8, A glue gel extraction pump work for more than 1 minutes without glue stop, that air is in the pipeline, the alarm will have to open the pump pipe joint, then open the A glue rubber glue pump, until now, stop and connect the connector glue gun will appear beep sound blasting with air. The air net is good.
9, because every flush mixer will not completely clean, every time there is a small amount of glue mixed deposits, more and more, that blocking the channel mixer, after a period of time, influence the quantity of cement and mixing effect, so regular (five days of polysulfide rubber, silicone rubber mixer cleaning for two days). The glue mixer and mixing, the damage as the replacement of the rubber mixing rod. If the glue stick can't be removed, the fire can be burnt out, and the thread of the part can not be damaged.
The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://www.tbplay265.com thank you for your arrival!