Glass is more and more widely used in modern architecture. Glass construction is inseparable from a convenient and fast glue beater! The following full-automatic glue machine manufacturers will popularize to you, debugging glue machine when there are what need to pay attention to!
1. After the machine is finished, the glue in the rubber tube should be washed out to prevent hardening. If it is not practical for a long time, we should pay attention to cleaning the rubber tube and gun with kerosene.
2. Silicone glue or polysulfide glue used in two-component glue beater should pay attention to the impurities should not be too high, low-quality glue is easy to block the filter system of rubber hose, resulting in poor or uneven glue production.
3. When replacing rubber varieties, special attention should be paid to rinsing the residual glue in the two-component glue beater, and it should be cleaned, because different kinds or even brands of glue are easy to react to clogging the machine.
4. The pressure of hydraulic station system can not be adjusted too high. According to the actual situation of indoor environment temperature, it can be adjusted to meet the normal tapping of rubber nozzles. When opening the hydraulic station, the rubber gun must be opened, otherwise the pressure of component B pipeline will rise very high, resulting in safety accidents.
I'm going to talk to you for a moment today. I hope this article can help you. If you have any questions about it, please consult our official for details. Http://tbplay265.com