A two-component glue machine is a major shift from manual to automatic, in the process of using glue machine, should pay attention to use the hand to touch any part of the equipment not, don't touch the control box on the circuit board components, especially the prohibition of live plug serious, it will lead to people electric shock and damage of equipment.
1, the working principle of compressed air into the plastic bottle (injector), the rubber pressure into the piston chamber is connected with the feed tube, when the piston is in the up stroke, the piston chamber filled with glue, glue when the piston pushes down the needle, needle from the mouth out of glue. Glue drop out is determined by the distance of the piston down, can be manually adjusted, can also control the software.
2. Characteristics: high speed, low sensitivity to viscosity of glue.
3, advantages: can improve the speed of glue, improve the glue environment and improve the quality of the glue. By using the pressure and microprocessor based timing devices to regulate the amount of fluid applied to the components, the artificial guess is replaced by the operator.
In the first use of new buy rubber machine equipment, pay attention to check whether the equipment is intact, there is no loosening and falling off. Because the rubber machine is likely to be loosened or dropped due to all kinds of vibration during the transportation process, so it is necessary to put into use after checking the confirmation. If there is a problem, the solution should be put into use in time.
The operators should regularly check the trachea and hose on the rubber machine equipment to prevent these pipes from aging and cracking and air leakage, so as to avoid these problems to increase safety.
The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://www.tbplay265.com thank you for your arrival!