广东11选5

花膠現象和打膠速度有一定聯系嗎?

發布時間:2018/04/09    發布人:

  HUAJIAOSHIYOUYUA/BZUFENJIAOTIHUNHEBUJUNYUNERCHANSHENGDE,BIAOXIANWEIJUBUYOUBAISETIAOWEN。ZHUYAOYUANYINYOU:⑴DAJIAOJIBZUFENGUANDAODUSAI;⑵JINGTAIHUNHEQICHANGSHIJIANWEIQINGXI;⑶BILICHISONGDONG,CHUJIAOSUDUBUJUNYUN;⑷HUANCHANGJIAHUOPAIHAOWEIDIAOZHENGSHEBEIGONGYICANSHU;ZHENDUIYUANYIN⑴、⑵,KEYITONGGUOQINGXISHEBEILAIJIEJUE;ZHENDUIYUANYIN⑶,ZEXUYAOJIANCHABILIKONGZHIQI,BINGJINXINGSHIDANGDEDIAOZHENG。

广东11选5  It is because the A/B component colloidal uneven mixing generated by the performance of the local white stripes. The main reasons are: (1) blockage of the B component pipe of the glue machine; (2) the static mixer has not been cleaned for a long time; (3) the scale is loose and the speed of the glue is not uniform; (4) changing the manufacturer or brand not to adjust the technical parameters of the equipment; for the reasons (1) and (2), it can be solved through the cleaning equipment; in view of the reasons, the proportion controller needs to be checked and carried out. Proper adjustment.

广东11选5  DANGSHUANGZUFENJIAOZAIHUNHEGUOCHENGZHONGJIUFASHENGJUBUGUHUASHI,JIAOQIANGDACHULAIDEJIAOJIUHUICHUXIANJIEPIHUOLIUHUAXIANXIANG。DANGGUHUAHECHUJIAOSUDUJUNWUYICHANG,ERDACHUDEJIAORENGYOUJIEPIHUOLIUHUAXIANXIANGSHI,ZEKENENGSHISHEBEITINGJISHIJIANJIAOCHANG,JIAOQIANGWEIQINGXIHUOXIQIANGBUGOUCHEDI,XUYAOJIANGJIEPIHUOLIUHUAJIAOCHONGXIGANJINGHOUHOUSHIGONG。

广东11选5  When the two component glue is locally solidified in the mixing process, the glue produced by the glue gun will appear crust or vulcanization. When the speed of curing and sizing is not abnormal, and the rubber still has the phenomenon of crust or vulcanization, it may be that the equipment stop time is longer, the rubber gun is not cleaned or the washing gun is not thorough enough, it is necessary to rinse the crust or vulcanizate after washing.

雙組份打膠機

广东11选5  RUGUOBZUFENCHUXIANKELIJIEKUAIFENHUAXIANXIANG,YUANYINYOULIANGGE:YISHISHIYONGQIANSHANGCENGYICHUXIANGAIZHONGXIANXIANG,ZHESHIYOUYUBAOZHUANGMIFENGBUHAO,BZUFENZHONGDEDEJIAOLIANJIHUOOULIANJIJUNWEIHUOXINGHUAHEWU,YIYUKONGQIZHONGDESHUIQIFASHENGFANYING,GAIPICIYINGTUIHUISHENGCHANCHANGJIA。ERSHIZAISHIYONGGUOCHENGZHONGTINGJI,ZAICIKAIJISHICHUXIANKELIJIEKUAIFENHUAXIANXIANG,SHUOMINGDAJIAOJIDEYAPANYUJIAOLIAODEMIFENGQIANJIA,YINGYUSHEBEIFANGLIANXIJIEJUEWENTI。

  There are two reasons for the phenomenon of particle agglomeration in the B component. One is that this phenomenon appears before the use of the upper layer. This is due to the poor packing seal. The crosslinker or coupling agent in the B component is the active compound, which is easy to react with the air in the water and gas. This batch should be returned to the manufacturer. The two is to stop in the process of use, and when the machine is reopened again, there is the phenomenon of particle caking powder. It shows that the sealing of the press plate and the glue is not good. It should be contacted with the equipment to solve the problem.

  以上便是雙組份打膠機今天的分享,您還滿意嗎,歡迎關注我們的網站:http://tbplay265.com并且關注我們的產品,我們將為您提供優良的產品,衷心的愿與您建立合作關系。

广东11选5  The above is the sharing of double component glue machine today, are you satisfied, welcome to our website: http://tbplay265.com and pay attention to our products, we will provide you with excellent products and

甘肃体彩网 甘肃体彩网 彩票计划神器 无锡体彩网 无锡体彩网 中国竞彩网 中国竞彩网 中国竞彩网