广东11选5

玻璃打胶如何才能打得光滑平整?

发布时间:2019/07/08    发布人:

想要打出光滑平整的胶,我们应该注意一些什么呢?我们和济南双组份打胶机厂家一起看看吧!
What should we pay attention to in order to make smooth and smooth glue? Let's have a look with Jinan two-component glue machine manufacturer.
1、首先有好的胶,然后出胶的胶嘴要切割平整大小要和铝合金打胶的位置大小相当;打胶时手要稳不能抖动,要一气呵成,朝一个方向打胶,不能多次停顿。
1. First of all, there is good glue, and then the glue nozzle should be cut flat to the same size as the position of aluminium alloy gluing; when gluing, the hand should be stable and not shake, and gluing in one direction should be completed at one go, and not stop many times.
2、就是靠手感,打多了,有经验了,自然就摸索出来了。
2. It depends on the feeling of the hand. If you play more and have experience, you will find out naturally.
3、削个45°角,口的大小看缝口大小定,这样能一次打好胶,外观漂亮,还节约胶。
3. Cut a 45 degree angle, the size of the mouth depends on the size of the seam, which can make a good glue, beautiful appearance, but also save glue.
4、切口呈45度坡角,这样打的胶平整光滑,不带印纹。
4. The incision is 45 degrees inclined, so that the glue is smooth and smooth without printing.
5、用壁纸刀斜削,胶嘴一般上面都有几个刻度,尽头的是小嘴,往下依次变大,你可以根据自己的需要的大小去削,可以先从小削起。
5. Cut obliquely with wallpaper knife. Generally, there are several scales on the rubber nozzle. At the end of the nozzle, it becomes bigger in turn. You can cut it according to your own size. You can start with the smallest one.

济南双组分打胶机
在操作的时候,我们要注意:
In operation, we should pay attention to:
1、重要的是右手握扳机,挤出玻璃胶的力度一定要均匀。要用我们平常所说的“阴力”,也就是保持一定的力量,但不能时大时小。要一气呵成,不能挤一挤,停一停,否则玻璃胶断断续续,又或者一大一小。因为通常玻璃胶刚被挤出喷嘴的时候,都是比较大的球状的。如果块大块小,就只能后面用涂抹的方法搽平了。
1. It is important to hold the trigger in the right hand and extrude the glass glue evenly. We should use what we usually call "negative force", that is, to maintain a certain strength, but not when big or small. If you want to finish at one go, you can't squeeze and stop. Otherwise, the glass glue will be intermittent, big or small. Usually when the glass glue is just extruded from the nozzle, it is larger spherical. If the block is large or small, it can only be smoothed with a smear on the back.
2、左手控制嘴,一定要让嘴的斜口紧贴缝隙,不能摇晃。
2. Left-hand control mouth, must let the mouth bevel close to the gap, can not shake.
3、脚步要稳,预先校准移动的距离,尽可能不要过多的移动脚步,适当将双腿分站得开一点,这样可以保证用上身平移或者转腰加手上功夫,挤出玻璃胶的直线。如果脚步走动过多,势必影响挤出玻璃胶的稳定性。
3. Step steadily, pre-calibrate the distance of movement, as far as possible do not move too much footsteps, appropriate legs stand a little open, so as to ensure the use of upper body translation or waist rotation plus hand effort, extrusion of glass glue straight line. If the footsteps move too much, it will inevitably affect the stability of extruded glass glue.
4、调节呼吸。不要大呼大吸,保持小幅度的呼吸,甚至短暂屏气,让上身不要因为呼吸摇晃过大。
4. Regulate breathing. Don't breathe heavily, keep a small breath, or even hold your breath for a short time. Don't let your upper body shake too much because of breathing.
以上的精彩内容由济南双组份打胶机的小编整理所得,以上内容均来源于网络,假如大家由不同的意见,欢送大家到我们的官网:http://www.tbplay265.com!给我们留言评论,我们会定期给大家一个回复!
The above wonderful contents are obtained from the small arrangement of Jinan two-component glue machine. The above contents are all from the network. If you have different opinions, welcome you to our official website: http://www.tbplay265.com! Leave us a comment and we will give you a regular reply!

广东11选5开奖记录 广东11选5走势图 广东11选5走势图 大圣棋牌 广东11选5走势图 麒麟棋牌 广东11选5开奖结果 广东11选5开奖结果 广东11选5走势图 广东11选5