If glue is replaced in the working process of filling machine? After a product is completed before the double liquid glue machine works, a product post glue work is required. If glue is used for these two products, Baiqing automation small editor recommends cleaning glue machine, glue, and then go to the next product glue work, because it may occur in two glue chemistry, resulting in abnormal situation.
If there is a key to clear the function first, the operation is relatively simple, press the cleaning button, the machine will automatically complete. If the double liquid automatic filling machine does not have the key cleaning function, when cleaning, first discharge the unused glue, then pour the organic solvent, such as Tianna water, industrial alcohol, etc. into the machine; then press the solvent out with glue and blow it off with an air gun. With this kind of machine, cleaning is very necessary, otherwise, within a short period of time, the glue liquid solidifies in the rubber valve, or the material barrel is very troublesome, some parts may need to be replaced. Therefore, it must be cleaned after each use.
The cleaning agents often used in cleaning filling machine are: industrial alcohol, water, acetone or dichloromethane. Generally, industrial alcohol is cheaper. For some glues, if the alcohol cleaning is not good, acetone can be used for cleaning. The cleaning effect of acetone is good and the cost is relatively high.
If the glue is replaced during the operation of the filling machine? Cleaning of the double liquid automatic filling glue machine: because the cleaning agent, in addition to some chemical solvents, will cause certain irritation to the skin and certain smell, it is better to wear waterproof gloves and keep the ventilation in the workshop during cleaning! The cleaning agent is easy to fall off, flammable and explosive, please do not smoke when using!